Owner`s manual

Using the e28 DAC
Computer Playback Using the Asynchronous USB Input
Before turning your amplifiers ON, always check the e28 DAC front panel to make sure
that the volume level is below -25dB.
• The e28 DAC can be controlled from the front panel buttons, using an IR remote control or from
the computer screen.
• Make sure that all cables are connected. Turn on the unit using the Power button on the front
panel of the remote control. The front panel display will light up. After powering on the USB
Input is selected by default.
• Click on the exaSound e28 Dashboard Icon in the System Tray area next to the clock.
System Tray
• You will see the exaSound e28 Dashboard window.
Channel View Minimised View
• During playback the current sampling rate is displayed under the master volume slider.
• You can customize the channel labels: Select a label with the mouse and edit the channel title.
Press Enter to save or Cancel to undo the change.
exaSound Dashboard Icon
Master Volume
Channel View
Channel Volume
Mute Button
Channel Labels
Sampling Rate
View Selector
Close Button
Page | 20