Owner`s manual

Page | 18
Volume Control
The e20 volume is controlled by the ES9018 DAC chip. It is independent from the Mac software volume
control and it preserves the maximum possible signal to noise ratio.
The volume level changes in steps of 0.5 dB. At first power on, the volume level is set to match the
volume level of your Mac. If the DAC is not connected to your Mac, when turned on the volume level is
set to -40 dB.
Use the volume sliders in the Audio MIDI Setup window to control the volume for individual channels
and the master volume.
The master volume can also be controlled from the device front panel or using a remote control. When
the master volume level is changed, the value displayed on the Mac screen and on the device front
panel display are synchronised.