Owner`s manual

Page | 17
Using the e18 DAC
Computer Playback Using the Asynchronous USB Input
Before turning your amplifiers ON, always check the e18 DAC front panel to make sure
that the volume level is below -25dB.
• The e18 DAC can be controlled from the from the front panel buttons, using an IR remote
control or from the computer screen.
• Make sure that all cables are connected. Turn on the unit using the Power button on the front
panel of the remote control. The front panel display will light up. After power on the USB Input
is selected by default.
• Click on the exaSound Dashboard Icon in the System Tray area next to the clock.
• You will see the exaSound Dashboard window.
Channel View Minimised View
• During playback the current sampling rate is displayed under the master volume slider.
• You can customize the channel labels: Select a label with the mouse and edit the channel title.
Press Enter to save or Cancel to undo the change.
• Use the arrow button between Channel 8 and the master volume to toggle between Channel
View and Minimised View.
• Use the X button in the top right corner to minimize the exaSound Dashboard window.