User's Manual

Exalt Communications, Inc.
EX-5r Installation & Management
5000007 57
2006-05-17
Emission Designator(s)
A-3 Interfaces
RF
Connector N-type Female
Impedance 50 ohms
T1/E1 (x4)
Connector RJ-45 (RJ48C), Female
T1 Impedance 100 Ohms, balanced
T1 Line Codes AMI, B8ZS, selectable
T1 LBO Settings (in ft.) 0-133, 133-266, 266-399, 399-533, 533-655
T1 Clocking Speed 1.544Mbps
T1 Compliance ANSI T1.102-1987; ITU-T; G.823; GR-49T-CORE
E1 Impedance 120 Ohms, balanced
E1 Line Codes HDB3
E1 Clocking Speed 2.048Mbps
E1 Compliance CEPT-1; G.703; ITU-T-G703
Loopback Modes Remote Internal, Remote External, Local Line
Ethernet/Power
Connector RJ-45, Female, auto-MDIX
Interface Speed 10 or 100Mbps
Duplex Half, Full, Auto, selectable
Compliance 802.3
Input Voltage 48VDC nominal
Consumption <1.2A @ 48V (<58 Watts)
Sync
Connector RJ45, Female
Signal 1pps (GPS)
Injector Power
Connector 6-pin barrier strip
Input Voltage 40-60Vdc
Consumption <1.2A @ 48V (<58 Watts)
5250-5350MHz 5725-5850MHz
8MHz
9M1W7D 9M5W7D
16MHz
18M2W7D 17M4W7D
32MHz
36M1W7D 33M7W7D
64MHz
71M0W7D 65M1W7D