User's Manual

Exalt Installation and Management Guide
EX-i Series GigE (FDD) Digital Microwave Radios
202675-008 17
2016-06-01
Figure 9 Primary front panel connectors
Table 2 Front Panel Connectors
Label Type Gender Function
T1/E1 (1–16) RJ-48C F Primary ports for User T1 or E1 circuits to
traverse link.
DS3 (IN/OUT) BNC F Primary ports for User DS3 circuit to traverse
link.
OC3 (IN/OUT) SFP F Primary port for User OC3 circuit to traverse
link
ETHERNET
(ETH1 and ETH2)
RJ-45 F Primary ports for user Ethernet and/or
management data (10BaseT, 100BaseT, or
1000BaseT) to traverse link.
SFP (Ethernet or ETH3) SFP F Accepts either a fiber or copper GBIC inserted
for Ethernet and/or management data
(1000BaseF or 1000BaseT).
EXP RJ-45 F Expansion port, used for Space Diversity,
MHS, XPIC, and Capacity Aggregation
configurations. Available on select models.
ALARMS 9-pin sub-D F External alarm inputs and outputs.
PROT RJ-45 F Protection port for MHS configurations.
CONSOLE 9-pin sub-D F Management port (serial) for PC/PDA for
Command Line Interface (CLI)
communications.
GND (Ground) Bantam F Common (return) volt meter test point for
measuring RSL.
RSL Bantam F Voltmeter test point for measuring received
signal level.
24–48VDC (2) 3-pin modular M DC power inputs from DC source or AC
adapter.
(Ground) Threaded (M5)
receptacle
F Chassis ground connection (M5 x 0.8 threads).