User's Manual

Exalt Communications, Inc.
Exalt i-Series Installation and Management Guide
5000001 16
2007-06-25
The Quick Start Guide provides any necessary username and password information to
gain access to these documents.
The Exalt i-Series of Digital Microwave Radios
The Exalt i-Series of Digital Microwave Radios are the most advanced carrier-class
point-to-point terrestrial radio communications devices operating in the 2400 to 2483.5
MHz, 4940 to 4990MHz and 5250 to 5850MHz frequency bands, respectively. Figure 1
shows the EX-2.4i Digital Microwave Radio.
Figure 1 EX-2.4i Digital Microwave Radio
The i-Series radios connect voice and/or digital data from one location to another,
obviating the need for copper or fiber connectivity, or enhancing existing connectivity by
providing a redundancy solution, a primary solution, and/or additional capacity.
The following models of radios are covered in this manual:
• EX-2.4i, 10/100 Ethernet + 4xT1/E1
¶ Configured for 100Mbps (32MHz/Mode2)
• EX-2.4i-16, 10/100 Ethernet + 16xT1/E1
¶ Configured for 4xT1/E1, 100Mbps (32MHz/Mode2)
¶ With license-key upgrade for 8xT1/E1, 100Mbps (32MHz/Mode2)
¶ With license-key upgrade for 12xT1/E1, 100Mbps (32MHz/Mode2)
¶ With license-key upgrade for 16xT1/E1, 200Mbps (64MHz/Mode2)
• EX-4.9i, 10/100 Ethernet + 4xT1/E1
¶ Configured for 2xT1/E1, 27Mbps (10MHz/Mode2, 20MHz/Mode1)
¶ With license-key upgrade for 4xT1/E1, 55Mbps (20MHz/Mode2)
• EX-5i, 10/100 Ethernet + 4xT1/E1
¶ Configured for 100Mbps (32MHz/Mode2)
¶ With license-key upgrade for 200Mbps capacity (64MHz/Mode2)
• EX-5i-16, 10/100 Ethernet + 16xT1/E1
¶ Configured for 4xT1/E1, 100Mbps (32MHz/Mode2)
¶ With license-key upgrade for 8xT1/E1, 100Mbps (32MHz/Mode2)