User's Manual

Exalt Communications, Inc.
r-series Installation and Management Manual
5000007 (ETSI) 80
2007-02-12 (draft)
Interfaces
RF (x2, EX-5r-(x)c only)
Connector N-type female
Impedance 50 Ohms
T1/E1 (x2, 2 interfaces each)
Connector RJ-45 (RJ48C), female
T1 Impedance 100 Ohms, balanced
T1 Line Codes AMI, B8ZS, selectable
T1 LBO Settings (in ft.) 0-133, 133-266, 266-399, 399-533, 533-655
T1 Clocking Speed 1.544 Mbps
T1 Compliance ANSI T1.102-1987; ITU-T; G.823; GR-49T-CORE
E1 Impedance 120 Ohms, balanced
E1 Line Codes HDB3
E1 Clocking Speed 2.048 Mbps
E1 Compliance CEPT-1; G.703; ITU-T-G703
Ethernet
Connectors RJ-45, female, auto-MDIX
Interface Speed 10 or 100 Mbps
Duplex Half, full, auto, selectable
Compliance 802.3
Sync-In
Connector RJ-45, female
Signal 1pps (GPS)
Power — Power Injector
Connector 6-pin barrier strip
Input Voltage 48VDC
Consumption <60 W (1.25A)