User Manual

Exalt Communications, Inc.
Exalt EX-4.9Series Module Guide
5xxxxxxx 7
2007-07-16
Generally, the EX-4.9 Series products require a clear line-of-sight and proper path
clearance to achieve a high-performance, reliable connection. Perform professional path
engineering and site planning BEFORE installing this equipment.
Note: It is the professional installer’s responsibility to ensure that
the radio system is implemented in a legal fashion. Exalt is not liable
for any unsafe or illegal installations.
Radio A/B Configuration
Use the Exalt GUI to configure the radio terminals for Radio A and Radio B orientation.
Since many other parameters also need to be set, and the Exalt GUI is needed for these
configurations, this is the best way to completely configure the radio terminals.
Radios arrive from manufacture in default configuration, orientated as Radio B and
configured as shown in Table 1.
Table 1 Factory Default Settings
Parameter EX-4.9
Frequency 4965 MHz
Transmit Power +4 dBm
Bandwidth 10 MHz
Mode Mode 1
Link Distance <10 miles
TDD Frame Size 2ms
Link Security Key 000000000000
Administration Password password
User Password password
IP Address 10.0.0.1
IP Mask 255.0.0.0
IP Gateway 0.0.0.0
Ethernet Interfaces Enabled, 100/Full
AUX port NMS Access In-Band
T1/E1 Settings (-16 models) All Enabled, T1, B8ZS, AIS
T1/E1 Settings (std. models) Disabled