User's Manual

Exalt Communications Inc.
EX-2.4i Installation and Maintenance Manual
Page 12
MAN-002400, Revision 001
2005-12-01
If mounting in a 23-inch rack, the rack mount extensions must be affixed to the standard rack
brackets. Simply attach these extensions using the screws supplied.
Figure 4-2: 23-inch Rack Mount
4.0.2 Wall Mounting the System
If mounting on a wall, a wall-mount kit is required. The brackets from the wall-mount kit can be
affixed so that the mounting holes are oriented towards the bottom of the radio. It is advised that
the brackets be mounted in the most central mounting location to the chassis, as shown.
Figure 4-3: Wall Mount
4.0.3 Table or Rack Shelf Mounting the System
If mounting on a table or a rack shelf, it is advised to affix the rubber feet that are included in the
accessory kit. Simply remove the adhesive cover from the rubber feet, and affix the feet to the
bottom of the unit near the corners. These feet will help keep the radio stable on a wooden or
metal surface to keep it from sliding.
In many areas, it is necessary to strap the equipment to a table or rack shelf if
mounting in this manner. In case of earthquake or other shock or vibration, or an
accidental pull of a cable, the unit should be secured from falling.
4.1 User Interfaces
This section is intended to provide a brief familiarization of the connectors, controls and
indicators on the device. More details about each item are found in other sections of this
document.
CAUTION