User guide

X-Rite eXact™ Instrument
64
Patch Recognition
A paper measurement followed by solid patch measurements must be performed first for proper
patch recognition to occur. Refer to the Troubleshooting section for additional information on
patch recognition.
G7, PSO and JapanColor Tools
These tools behave the same as the generic Job Tool, with the following differences.
The settings of these tools use the definition of its process specifications. These tools do not get
preset with the regional settings. However, the settings can be changed manually by the user.
In difference to the other tools, “Restore Tool Default Settings” returns the tool to its original
settings, but not to the current user profile settings.
Only job templates defined for these processes get listed (e.g., if a job template was defined for
G7, it appears only for the G7 tool).
The following functions are preset and cannot be changed.
G7 Job
Paper QC: Color Space CIE L*a*b* is preset to CIE L*a*b*
Gray Balance QC: Display is preset to ΔL*, ΔE*, ΔCh
TVI Table Setting: Spread is preset to All
PSO Job
Paper QC: Color Space CIE L*a*b* is preset to CIE L*C*h°
Gray Balance QC: Display is preset to ΔL*, Δa*, Δb*, ΔE*
TVI Table Setting: Spread is preset to Middle
JapanColor Job
Paper QC: Color Space CIE L*a*b* is preset to CIE L*C*h°
Gray Balance QC: Display is preset to ΔL*, Δa*, Δb*, ΔE*
TVI Table Setting: Spread is preset to Middle
Reviewing/Editing Job Parameters
Job functions and settings are normally assigned within the selected job tool that is downloaded
to the instrument.
1. Tap and hold the Job tool icon
on the main menu screen to access the tool edit screen.
NOTE: The tool settings can also be accessed by tapping the triangle icon in the status bar
when the tool is selected.
OR