User guide

X-Rite eXact™ Instrument

Status Bar (4)

The status bar displays the current function selected, connection method (USB or Bluetooth),

battery gauge, etc. The triangle icon at the bottom is used to access the settings screen.

• Tool Indication: Displays the name of the tool selected.

• USB or Bluetooth Connection: The USB icon appears when the instrument is plugged

into the USB port on the computer. The Bluetooth

icon appears when searching for a

connection and when a connection is established to the computer.

• Security Icon (locked or unlocked): Indicates if the security is active for the current user,

and if the user currently has security temporarily disabled (unlocked) or active (locked).

• NetProfiler Icon: Indicates if the NetProfiler is active, out of date, etc.

• Battery Gauge: Depicts the current condition of the battery pack.

Indicates the battery pack is fully charged.

Indicates the battery pack has a sufficient charge for a substantial number

of measurements.

Indicates the battery pack is low, but measurements are still possible.

Battery pack should be charged soon.

Indicates the battery pack is very low and only a few measurements

remain. Battery pack should be charged immediately. Indicator will appear

red during this condition.

Indicates the AC adapter is plugged in and the battery pack is charging.

Indicates the AC adapter is plugged in and no battery pack is installed.

• Triangle Icon: Accesses the instrument settings screen for the current user or tool.

• Time: Displays the current time.

Initial Wizard Setup

Upon initially startup, the eXact instrument requires you to specify some basic settings. The

settings can be individually changed at a later time.

1. Tap the desired language in the list that you want the instrument to operate in. Tap OK to set

and continue.

2. Tap the left or right hand icon for the operational direction of the screen. Tap OK to set and

continue.