User guide

X-Rite eXact™ Instrument
24
(UVC) UV Cutoff Filter, UV excluded.
M3
(Pol)
Reflectance measured with cross-polarized A Illuminant excluding UV component,
previously called: Polarization-Filter.
Scan Mode
Scan Mode: Scan a color bar and send data to software.
Speed Indicator (blue): Scanning speed is too slow.
Speed Indicator (cyan): Scanning speed is a little slow.
Speed Indicator (white): Scanning speed is ok.
Speed Indicator (magenta): Scanning speed is a little fast.
Speed Indicator (red): Scanning speed is too fast.
Main Measurement Screen
The main measurement screen consists of four main elements: navigation bar icons (1), data and
options area (2), measurement screen icons (3), and status bar icons (4).
Refer to the eXact Icons section earlier in this manual for a description of all icons.
Navigation Bar Icons (1)
The icons along the top of the screen are used to access screens where measurement or
selections can occur. As with the menu tools, simply tap the icon to open its screen.
Data and Options Area (2)
This area displays a simulated color patch of the measurement, measurement data and option
selections for the currently selection tool. Data and options vary depending on the tool, settings
or analyses.
Measurement Screen Icons (3)
The icons along the right side of the screen are used to change data views or enable further
settings. These icon’s color changes based on the tool being used. This helps to quickly identify
what tool is currently active. Magenta indicates the Basic tool, orange indicates the Compare tool,
green indicates the Search tool, and cyan indicates the Job tool.
(1)
(2) (3)
(4)