Operating instructions

10
Safety
english
Intended Use
PipeCut 280E/360E:
The PipeCut 280E/360E pipe saw is intended
for use as a pipe fi tter’s tool at the installation
site. The PipeCut 280E/360E pipe saw can only
be used to cut round pipes, with a diameter
of 280E: 40 mm – 280 mm (1.6”-11”) or 360E:
75 mm – 360 mm (3”-14”) and a maximum wall
thickness of 10 mm (0.4”) with steel and other
ferrous and non-ferrous materials and 38 mm
(1.5”) with plastics. The PipeCut 280E/360E pipe
saw can be used to cut all normal pipe materials,
such as steel, stainless steel, cast iron, copper,
aluminium and plastic. PipeCut 280E/360E
pipe saw is intended for short, intermittent use.
The machine may be loaded for 2,5 minutes
during a 10-minute period (S3 25 %). PipeCut
280E/360E pipe saw is not intended for use
in industrial production. Use pipe holders to
support pipe.
Product Features
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
This page is folded under the cover of this
manual (page 3). The following numbering of the
product features refers to this illustration.
Figure A
1. UNLOCK button
2. Power switch
3. Power-switch locking lever
4. Blade-guard cover
5. Overload indicator light
6. Moving blade-guard
7. Edge of moving blade-guard
8. Adjustable wheel
9. Operating handle
10. Chip removal lever
11. Chip removal nozzle
12. Blade-guard screw
13. Spindle-lock button
14. Rating plate
15. Motor unit
16. Speed control
17. Gripper unit
18. Gripper safety
19. Gripper adjustment handle