Technical data

Operating, safety, and servicing instructions
The Exact PipeCut 170/170E pipe saw is manufactured in accordance with the EU standard EN 60745-
1 and also standard EN 60745-2-5 exclusive of the requirement which relates to the opening of the blade
guards. (The Exact PipeCut 170/170E pipe saws use is made easier by being able to open the blade
guard without tools).
The sound pressure level when sawing steel, which is measured according to EN 60745:
Model170E LpA = 94 dB (A), LwA =105dB (A), LpCpeak = 98 dB (C). Model170 LpA = 86
dB (A), LwA =97dB (A), LpCpeak = 98 dB (C). When sawing various types of material the
sound level vary and may exceed the 85 dB(A) level. Always use ear protectors to protect
yourself!
Vibration level: The weighted acceleration value according to EN 60745 does not exceed 2.5 m/s
2
.
Electrical safety
The electric motor is designed to be used at the specified voltage only. It can be loaded intermittently for
2.5 min during a 10 min time span (S3 25 %). Always check that the power supply corresponds to the
voltage stated on the rating plate. The Exact 170/170E pipe saw is double insulated as required by
standard EN 60745-1
Do not take the pipe saw out in the rain. Never use it in wet or damp conditions.
Please read this operating, safety, and servicing instructions carefully before
using the pipe saw. Also store this instruction book somewhere accessible to
everyone using the pipe saw. In addition to these instructions, always follow
the official work, health and safety regulations. The Exact PipeCut 170/170E is
meant for professional use only.
Technical data
Kuva A
3
Foreword
Pipecut 170
230 / 50 Hz
1010 W
4000 r/min
S3 25%
140 mm
62 mm
5,7 kg
Ø 15 mm – Ø 170 mm
steel 6 mm, plastics 14 mm
Pipecut 170E
230 / 50 Hz
1200 W
1600-3500 r/min
S3 25%
140 mm
62 mm
5,7 kg
Ø 15 mm – Ø 170 mm
steel 8 mm, plastics 14 mm
Model
Voltage
Power
Speed when unloaded
Intermittent operation
Blade diameter
Blade attachment hole
Weight
Range of use
Max. pipe wall thickness