User guide
EXACOM VCR-2020
Copyright 1991, 92, 93, 94, 95, 96 all rights reserved by EXACOM, Inc.
20
3.3.0 MEMORY STATUS Mode
This mode is selected by pressing the STOP button once after CONSOLE SELECT
mode. This mode displays the status of the VCR-2020 memory. The display is shown
in Figure 13.
Figure 13: Supervisor MEMORY STATUS Display
The total percentage of SAVED memory is shown, as well as minutes and seconds of
SAVED messages. SAVED messages are those messages which are marked by
Operators as SAVED by pressing the SAVE button during playback. If the system has
a large number of saved messages, it may affect performance. Messages can be cleared
by selecting them and pressing the SAVE/CLEAR button (in Supervisory MESSAGE
PLAY mode only).
3.4.0 TIME SET Mode
This mode allows setting of the real-time clock. The mode is selected by pressing the
STOP button twice once the Supervisor Key has been turned on.
Figure 14: Supervisor TIME SET Display
The FREV button sets the Hour, the FFWD button sets the minute (always to an even
minute) and the PLAY button allows the display to be in either 24-hour (24HR) or AM
/ PM (12HR formats. Pressing each button increments the value, then cycles. The first
time a button is pressed, the current time will be "copied" from the top left and placed
above the labels, and the item associated with the button pressed will increment.