User guide

EXACOM VCR-2020



3.0 Supervisor Key Requirement

All VCR-2020 supervisory functions require that a supervisor key be inserted into the

keyswitch labeled SUPERVISOR, and that the key be turned ON, by turning the switch

clockwise.

WARNING:

Once a console has been placed in Supervisory Mode,

it will not RECORD from the phone line, if any,

attached to the console.

3.1 Supervisor Modes

There are five operating modes in VCR-2020 Supervisory mode:

• CONSOLE SELECT

(MESSAGE SEARCH)

(MESSAGE PLAY)

(MONITOR)

• MEMORY STATUS

• TIME SET

• DATE SET

• IDLE

Each mode is selected by pressing the STOP button (labeled SUPV). Each time the

button is pressed, the mode will change.

3.1.1 CONSOLE SELECT Mode

This is the operating mode when the Supervisory key is first turned on. The display is

shown in Figure 11.

Figure 11: Supervisor CONSOLE SELECT Mode Display