Owner's manual

Important:
Please leave two sockets of top rail open. It helps you adjust the whole frame easily when assembling the L shaped top rails.
Important:
The small beads on all W-shaped legs must face inside the frame.
Step 2 Support Assembly
(1). Two people are required. One lifts the Support Assembly from Step 2 to a standing (vertical) position, inserts one of the
sockets of the Straight Top Rail into the Vertical Leg Extension portion of the Support Assembly; the other holds the adjacent
top rail and inserts socket of the top rail into the other Support Assembly as shown.
(2). Repeat the step to connect the other three supports assembly to the top rails.
(3). Assemble the rest L shaped top rails to straight top rails together. Slide a section (male) tubing that is smaller on one end into
the adjacent section(female) that has larger openning.
Step 3 Frame Assembly
E
D
C
B
A
A
NOTE: The small beads on all W-shaped legs
must face inside the frame.
NOTE: leave open.