Owners manual

3. ASSEMBLY:

STEP 1:

SPREAD THE SAFETY MESH OUT FLAT ON THE TRAMPOLINE MAT FIRSTLY AS

SHOWN IN FIGURE. 1, AND PUT TWO SECTIONS OF SUPPORT PIPES CONNECTED TO

GETHER AS SHOWN IN FIGURE 2.

STEP 2:

INSERT SUPPORT PIPES INTO THE SLEEVES OF SAFETY MESH IN ORDER, AS SHOWN

IN FIGURE 3.

STEP 3:

STAND THE SUPPORT PIPES CORRESPOND ANEAR TO EACH TRAMPOLINE LEG

ORDERLY (AS SHOWN IN FIGURE 3)

FIGURE 1

FIGURE 2

ASSEMBLY INSTRUCTION FOR PROTECTIVE NET

WARNING: ONLY ASSEMBLE BY ADULT. READ AND FOLLOW THIS

INSTRUCTION, PRIOR TO ASSEMBLE AND USE OF THIS EQUIPMENT.