Owners manual

M
A
T & COVER
A
SSEMB
L
Y
DANGER: 3 adults may be required to complete placement of all springs as illustrated in STEP 13. Springs will create high levels of
tension when assembled. Please use extreme caution not to pinch your fingers.
8 With stitching portion facing down, lay jumping
mat inside frame and attach a spring into one of
the triangle rings on the mat. Then attach spring
with ring to frame.
WARING: Trampoline is under heavy tension,
more effort may be required to attach springs to
frame. Be careful not to pinch fingers or slip.
Serious inuury may occur!
9 Repeat this step directly across from
where you attached first spring. Then
attach two more springs half distance
between the first two, directly across
from each other.
10 Use spring tool as shown.
11 Springs under heavy tension may
require adjacent springs to be
attached every four or five holes
,
making the springs tension
averagely distributed.
12 Attach remaining springs until all
springs are placed on frame
securely.
13 Lay blue frame cover on outer
edge so springs are covered-
just like a shower cap.
14 Tie all black straps to top rail of
frame. Do not tie to springs. .
15 That’s it! Your trampoline is
complete!
To disassemble repeat steps 1-15 in reverse.
14