Operating instructions

SEPTEMBER 2005 MAGNUM 1X7 LTO AUTOLOADER
8-9
WHAT THE AUTOLOADER RETURNS
8.3.4 SYSTEM STATISTICS PAGE (PAGE CODE 30h)
The System Statistics Log page includes four bytes of descriptive information
(see page 8-5) and returns the cumulative autoloader system statistics stored in
nonvolatile RAM shown Ta b l e 8 - 3 . These values are not reset after power
cycles or resets
18h Autoloader
Inventory
C The autoloader has detected an inconsistency in the cartridge
inventory.
1. Use the operator panel or issue a INITIALIZE ELEMENT STATUS
command to update the cartridge inventory to correct the
inconsistency.
2. Restart the operation.
19h Autoloader
Illegal
Operation
W An autoloader operation has been attempted that is invalid at this
time.
a
I = Informational suggestion to user.
W = Warning. Remedial action is advised. Performance of data may be at risk.
C = Critical. Immediate remedial action is required.
Table 8-2 Parameters returned for the LOG SENSE TapeAlert page (continued)
Parameter
Code
Flag Name Type
a
Description and Corrective Action
Table 8-3 System Statistics (saved in NVRAM)
Log Parameter Function
Log
Parameter
Code
Parameter Control Byte
Parameter
Length
DU DS TSD ETC TMC LP
Tot a l N um b er of M ov es 0 0 1 0 0 0 0 4
Total Number of Pick Retries 1 0 1 0 0 0 0 4
Total Number of Put Retries 2 0 1 0 0 0 0 4
Total Number of Scans 3 0 1 0 0 0 0 4
Total Number of Scan Retries 4 0 1 0 0 0 0 4
Total Number of Scan Failures 5 0 1 0 0 0 0 4
Total Number of Door Cycles 6 0 1 0 0 0 0 4
Total Number of Door Retries 7 0 1 0 0 0 0 2
Total Number of Carousel Retries 8 0 1 0 0 0 0 2
Service Required (bit 0) 9 0 1 0 0 0 0 2
Tot a l D rive Lo a d R e tr ie s 10 (0Ah) 0 1 0 0 0 0 4