Operating instructions

SEPTEMBER 2005 MAGNUM 1X7 LTO AUTOLOADER
6-5
WHAT THE AUTOLOADER RETURNS
Response Data Format – Byte 03, Bits 3 through 0
The value returned for this field is 2h, indicating that the data is in accordance
with SPC-2 (SCSI Primary Commands – 2).
Additional Length – Byte 04
The value returned for this field is 67h, indicating that there are 67h (103)
additional bytes of inquiry data available to be returned to the initiator.
SCCS (SCC Supported) – Byte 05, Bit 7
The value returned for this field is 0, indicating that the autoloader does not
support this function.
BQue (Basic Queuing) – Byte 06, Bit 7
The value returned for this field is 0, indicating that the autoloader does not
support this tagged tasks.
EncServ (Enclosure Services) – Byte 06, Bit 6
The value returned for this field is 0, indicating that the autoloader does not
support this function.
MultiP (Multi Port) – Byte 06, Bit 4
The value returned for this field is 0, indicating that the autoloader does not
support this function.
MChngr (Medium Changer) – Byte 06, Bit 3
The value returned for this field is 0, indicating that the autoloader is not an
attached media changer.
Addr16 (SCC Supported) – Byte 06, Bit 0
The value returned for this field is 1, indicating that the autoloader supports
16 SCSI IDs.
RelAdr (Relative Addressing) – Byte 07, Bit 7
The value returned for this field is 0, indicating that the autoloader does not
support this function.
WBus16 (Wide Bus 16) – Byte 07, Bit 5
The value returned for this field is 1, indicating that the autoloader does
support 16-bit-wide bus transfers.
Sync (Synchronous Transfer) – Byte 07, Bit 4
The value returned for this field is 1, indicating that the autoloader does
support synchronous data transfer.