Operating instructions

I-6
SCSI REFERENCE 1012975
INDEX
SEND VOLUME TAG (B6h) command
description 23-1 to 23-5
errors reported 23-5
field definitions 23-2
status reporting 23-4
use 3-6, 23-1
sense bytes, REQUEST SENSE command 18-3
sense key 18-3
Sequential mode 1-3
service, returning drive for iii
standard inquiry data
effect of emulation modes 6-6
page format 6-3
product identification 6-6
vendor identification 6-6
standards xvi
status of commands 2-9 to 2-10
storage elements 2-2, 9-6, 10-5, 15-9 to 15-11,
19-9 to 19-11
Supported Diagnostic Pages page
RECEIVE DIAGNOSTIC RESULTS 16-3
SEND DIAGNOSTIC 22-4
Supported Vital Product Data Page 6-8 to 6-9
T
tape drive
description 1-2, 1-2
resetting 3-2 to 3-3
See also data transfer element
status 2-9 to 2-10
TapeAlert Page, LOG SENSE (4Dh)
command 8-6 to 8-9
Target Reset (0Ch) message 2-5
targets, defined 2-1
Task Complete (00h) message 2-5
Technical Support iii, -iii
TEST UNIT READY (00h) command
description 24-1 to 24-2
errors reported 24-2
status reporting 24-1
use 3-9, 24-1
U
Unit Attention (6h) sense key, description 18-4
unit serial number 6-9
Unit Serial Number Page 6-9
V
volume tag information
reporting 19-1
requesting 23-1
template for SEND VOLUME TAG
command 23-3
VXA AutoPak 1x10 emulation mode 6-6
W
warranty, product warranty caution ii
WRITE BUFFER (3Bh) command
description 25-1 to 25-6
errors reported 25-6
field definitions 25-3 to 25-3
processing steps 25-2
status reporting 25-5
use 3-10, 25-1 to 25-2
using to update autoloader
microcode 25-3 to 25-5