Operating instructions

I-4
SCSI REFERENCE 1012975
INDEX
M
Medium Error (3h) sense key 18-4
medium transport element 2-2, 9-5, 10-5,
15-7 to 15-8, 19-7 to 19-8
Message Parity Error (09h) message 2-5
Message Reject (07h) message 2-5
messages
Ignore Wide Residue (23h) 2-5
messages, SCSI 2-4 to 2-5
microcode
copying 3-10
copying to initiator using READ
BUFFER 14-1 to 14-3
updating using WRITE
BUFFER 25-1 to 25-2, 25-3 to 25-5
MODE SELECT (15h) command
Cleaning Configuration Page 9-12 to 9-13
description 9-1 to 9-15
Element Address Assignment
Page 9-3 to 9-6
errors reported 9-14
field definitions 9-2 to 9-13
LCD Mode Page 9-10 to 9-11
status reporting 9-13
Unique Properties Page 9-7 to 9-9
use 3-3, 9-1 to 9-2
MODE SENSE (1Ah) command
Cleaning Configuration
Page 10-14 to 10-16
description 10-1 to 10-17
Device Capabilities Page 10-7 to 10-9
Element Address Assignment
Page 10-4 to 10-5
errors reported 10-17
field definitions 10-2 to 10-3
LCD Mode Page 10-12 to 10-14
Operating Mode Page 10-16
status reporting 10-17
Transport Geometry Descriptor Page 10-6
Unique Properties Page 10-10 to 10-12
use 3-3, 10-1
MOVE MEDIUM (A5h) command
description 11-1 to 11-7
errors reported 11-7
field definitions 11-2
status reporting 11-6
use 3-8, 11-1
N
Native emulation mode 6-6
No Bar Code Label (NBL) bit, using to disable bar
code scanning 4-2
No Diagnostic Results Available page 16-5
No Operation (08h) message 2-5
No Sense (0h) sense key 18-3
Not Ready (2h) sense key 18-3
O
operations, SCSI 3-1 to 3-10
Original Data Page 6-11
P
Parameter Code 8-6
parameter list length
SEND DIAGNOSTIC 22-3
phases, SCSI bus 2-4
POSITION TO ELEMENT (2Bh) command
description 12-1 to 12-3
field definitions 12-2
status reporting 12-2
use 3-8, 12-1
power-on reset 3-2
PREVENT/ALLOW MEDIUM REMOVAL (1Eh)
command
description 13-1 to 13-2
field definitions 13-1
status reporting 13-2
use 13-1
Product Identification, effect of emulation
modes 6-6
product warranty caution ii