Operating instructions

SEPTEMBER 2005 MAGNUM 1X7 LTO AUTOLOADER
I-3
INDEX
error messages on the LCD A-1 to A-5
error recovery procedures (ERP) A-18
errors in CDB format 2-10
Exabyte, contacting iii
Extended Messages (01h) message 2-5
extended sense bytes, REQUEST SENSE
command 18-3
EZ17 Autoloader emulation mode 6-6
F
Fault Symptom Codes (FSCs)
definition A-6
for all sense keys A-6 to A-17
list A-6 to A-17
firmware
See microcode
format errors in CDBs 2-10
front panel components 1-1
G
Good (00h) status 2-9
H
Hardware Error (4h) sense key 18-4
I
Identify (80h or C0h) message 2-5
Illegal Request (5h) sense key 18-4
INITIALIZE ELEMENT STATUS (07h) command
description 4-1 to 4-4
effect of the NBL bit 4-2
field definitions 4-2
status reporting 4-4
use 3-4, 4-1 to 4-2
INITIALIZE ELEMENT STATUS WITH RANGE
(E7h) command
description 5-1 to 5-5
effect of the NBL bit 5-2
field definitions 5-2 to 5-2
status reporting 5-4
use 3-4, 5-1 to 5-2
Initiator Detected Error (05h) message 2-5
initiator, defined 2-1
INQUIRY (12h) command
Code Level Page 6-11 to 6-13
description 6-1 to 6-14
Device Identification Page 6-10 to 6-11
effect of emulation modes 1-4, 6-6
field definitions 6-2
Original Data Page 6-11
standard inquiry data 6-3 to 6-7
status reporting 6-13
Supported Vital Products Data
Page 6-8 to 6-9
Unit Serial Number Page 6-9
use 3-9, 6-1
L
LCD
changing default text for Display
Line 1 9-10 to 9-11
controlling security 9-10, 10-13
description 1-2
error messages A-1 to A-5
LCD Mode Page (Page Code 22h)
settings 9-10 to 9-11, 10-12 to 10-14
viewing default text for Display
Line 1 10-14
liquid crystal display
See LCD
LOG SELECT (4Ch) command
description 7-1 to 7-2
field definitions 7-1
status reporting 7-2
LOG SENSE (4Dh) command
Cartridge Scan Retries Page 8-11
Command Failure Page 8-13
description 8-1 to 8-17
Element Statistics Page 8-10 to 8-11
Environmental Page 8-12
errors reported 7-2, 8-17
field definitions 8-2
log parameter format 8-5 to 8-6
log parameters returned 8-4 to 8-16
status reporting 8-16
Supported Log Pages 8-6
System Statistics Page 8-9
TapeAlert Page 8-6 to 8-9
use 3-9, 8-1
LVD SCSI 1-2