Operating instructions

SEPTEMBER 2005 MAGNUM 1X7 LTO AUTOLOADER
A-17
ERRORS REPORTED OVER THE SCSI BUS
1Bh 87h 23h 4h D, L 8, 13, 12 Drive comm timeout. The autoloader is
unable to communicate with the tape
drive.
1Bh 87h 24h 4h D, L 8, 13, 12 Drive comm failed. The autoloader is
unable to communicate with the tape
drive.
1Ch 3Bh 0Dh 5h A, O 11, 6 Destination full. The destination element
was occupied for a MOVE MEDIUM
command. Redirect the cartridge loader
to a different location.
1Dh 3Bh 0Eh 5h A, O 11, 7 Source empty. The source element was
empty for a MOVE MEDIUM command.
Redirect the cartridge loader to a different
location.
1Eh 04h 8Eh 02h O 11, 2 Not Ready. Sequential mode. An
application tried to issue commands to
the autoloader while it was in Sequential
mode.
1Fh 30h 00h 3h T, D 9, 14,
13, 12
Incompatible medium. (The media does
not have a compatible logical format.)
 Incompatible media was ejected after a
LOAD command was issued.
 Incompatible media was rejected after
the data cartridge was inserted.
1Fh 53h 00h 03h I 10 Media Load/Eject fail. Media removal
prevented.
20h 53h 00h 03h I 10 Media Load/Eject fail. Media removal
prevented.
21h 04h 8Dh 02h O 11, 2 Not Ready. Key mode. An application
tried to issue commands to the autoloader
while it was being controlled from the
operator panel.
22h 04h 89h 02h O 11, 2 Not Ready. Console mode. An
application tried to issue commands to
the autoloader while it was being
controlled from the Remote Management
utility.
Table A-3 REQUEST SENSE error information (FSC, ASC, ASCQ, and SK (continued)
FSC
ASC
(byte 12)
ASCQ
(byte 13)
Sense
Key
Cause ERP SCSI Error Message and Description