Operating instructions

A-8
SCSI REFERENCE 1012975
CHAPTER A—ERROR CODES
24h 00h 10h 5h A 4 Invalid field in CDB. There were invalid
fields in the CDB.
25h 00h 10h 5h A, O 4 Logical Unit not supported. The logical
unit number specified in the Identify
message or in the CDB is not zero.
26h 00h 10h 5h A, O 4 Invalid field in parameter list. There was
an invalid field in the parameter list.
26h 02h 10h 5h A, O 4, 15 Parameter value invalid. There was an
invalid parameter value in the parameter
list.
28h 00h 00h 6h I 10, 11 Not Ready to Ready. Door closed. The
autoloader’s door was opened and then
closed.
29h 00h 00h 6h I 10, 11 Power on or reset. A power-on, SCSI bus
reset, or Target Reset message occurred.
2Ah 01h 00h 6h I 10, 11 Mode parameters changed. Mode
parameters have been changed. Issue a
MODE SENSE (1Ah) command to
determine what the new mode
parameters are.
2Ah 02h 00h 6h I 10, 11 Log parameters changed. Log
parameters have been changed. Issue a
LOG SENSE (4Dh) command to
determine what the new log parameters
are.
30h 00h 16h, 1Fh 3h T, D 9, 14,
13, 12
Incompatible medium. (The media does
not have a compatible logical format.)
 Incompatible media was ejected after a
LOAD command was issued.
 Incompatible media was rejected after
the data cartridge was inserted.
3Bh 0Dh 18h, 1Ch 5h A, O 11, 6 Destination full. The destination element
was occupied for a MOVE MEDIUM
command. Redirect the cartridge loader
to a different location.
3Bh 0Eh 19h, 1Dh 5h A, O 11, 7 Source empty. The source element was
empty for a MOVE MEDIUM command.
Redirect the cartridge loader to a different
location.
Table A-2 REQUEST SENSE error information (ASC, ASCQ, FSC, and SK) (continued)
ASC
(byte 12)
ASCQ
(byte 13)
FSC
Sense
Key
Cause ERP SCSI Error Message and Description