Operating instructions
1-4
SCSI REFERENCE PRELIMINARY 1012975
CHAPTER 1—PRODUCT OVERVIEW
1.3 EMULATION MODES
Emulation allows the autoloader to be controlled by most, but not all, SCSI
drivers developed for the device being emulated. Ta b l e 1 - 1 lists the INQUIRY
command Product Identification string returned by the autoloader for each
emulation mode setting. See page 6-6 for more information about the Product
Identification string.
Table 1-1 Product Identification string returned by the autoloader when using an emulation mode
When you select this
emulation mode...
The autoloader returns this Product Identification string
in response to an INQUIRY command...
Native The Product Identification stored in the autoloader’s microcode. The default is
“LTO_1x7_2U______” where each “_” represents an ASCII space character.
VXA AutoPak 1x10 “VXA_AutoPak_1x10” where each “_” represents an ASCII space character.
EZ17 Autoloader “Exabyte EZ17_ _ _ _” where each “_” represents an ASCII space character.
210 Emulation “EXB-210_________” where each “_” represents an ASCII space character.