Operating instructions

ManualsBrandsExabyte ManualsNAS & storage serversMAGNUM 1X7 LTO AUTOLOADER

SCSI REFERENCE 1012975

information contained herein are the property of Exabyte Corporation. No part of this

document may be reproduced, transmitted, transcribed, stored in a retrieval system, or

translated into any language or computer language in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the

express written permission of Exabyte Corporation, 2108 55th Street, Boulder, Colorado

80301.

DISCLAIMER

Exabyte Corporation makes no representation or warranties with respect to the contents

of this document and specifically disclaims any implied warranties of merchantability

or fitness for any particular purpose. Further, Exabyte Corporation reserves the right to

revise this publication without obligation of Exabyte Corporation to notify any person or

organization of such revision or changes.

TRADEMARK

NOTICES

Exabyte, Exapak, VXA, and VXAtape are registered trademarks; M2, MammothTape,

SmartClean, ExaBotics, EZ17, and NetStorM are trademarks; People Working for You

and SupportSuite are service marks of Exabyte Corp. Linear Tape-Open, LTO and

Ultrium are trademarks of International Business Machines Corporation, Certance and

Hewlett-Packard. All other product names are trademarks or registered trademarks of

their respective owners.

PART NUMBER

REVISION HISTORY

1012975 C

OTE: The most current information about this product is available at Exabyte’s web site

(www.exabyte.com).

PRODUCT

WARRANTY

CAUTION

The Magnum 1x7 LTO Autoloader by Exabyte

Corporation is warranted to be free

from defects in materials, parts, and workmanship and will conform to the current

product specification upon delivery. For the specific details of your warranty, refer to

your sales contract or contact the company from which the autoloader was purchased.

The warranty for the autoloader shall not apply to failures caused by:

 Physical abuse or use not consistent with the operating instructions or product

specifications.

 Repair or modification by any one other than Exabyte’s personnel or agent in a

manner differing from the maintenance instructions provided by Exabyte.

 Removal of the Exabyte identification label(s).

 Physical abuse due to improper packaging of returned autoloader.

If problems with the autoloader occur, contact your maintenance organization; do not

void the product warranty by allowing untrained or unauthorized personnel to attempt

repairs.

Revision Date Description

A January 2005 Initial release.

B March 2005 Updated to add LTO-3 information.

C September 2005 Minor corrections and updates.

Caution

Returning the autoloader in unauthorized packaging may damage the unit and void the

warranty. If you are returning the autoloader for repair, package it in its original packaging

(or in replacement packaging obtained from your vendor.)