Operating instructions

SEPTEMBER 2005 MAGNUM 1X7 LTO AUTOLOADER
12-3
COMMAND STATUS
 The autoloader is not ready because the door is open.
 The destination is a tape drive and the tape drive is not installed.
 The autoloader encounters a problem during the position operation.
 A reserved bit is set to 1 in the CDB.
 A parameter in the CDB is invalid (see Table 12-1 for sense data).
Table 12-1 Invalid parameters in POSITION TO ELEMENT CDB and position errors
Sense
Key
ASC ASCQ
SKSV
Bit
C/D
Bit
BPV
Bit
Bit
Pointer
Field
Pointer
Error
5h 21h 01h 1 1 0 — 0002h Invalid transport element address.
5h 21h 01h 1 1 0 — 0004h Invalid destination element address.
5h 24h 00h 1 1 1 — —
A reserved bit is set in the CDB. The
pointers point to the bit in error.
5h 24h 00h 1 1 1 0 000Ah Invalid Invert field.
5h 80h 06h 0 0 0 0 0000h Destination tape drive is not installed.