Operating instructions

SEPTEMBER 2005 MAGNUM 1X7 LTO AUTOLOADER
11-5
EFFECTS ON THE CARTRIDGE INVENTORY
 A cartridge move operation was requested with the same source and
destination address. This type of operation is requested when the occupied
status of a location is questionable (the Occupied Valid flag is set to 0). The
autoloader does not attempt to move a cartridge if the Occupied Valid flag
is set to 1 for the source and destination address and the location is a storage
location. Table 11-4 describes how the cartridge inventory is updated.
Tape Drive Accessible 1 no change
Pick Retries updated if retried no change
Put Retries updated if retried no change
Total Puts incremented no change
Source Address no change no change
Table 11-3 Effect on the cartridge inventory of a move operation when the destination is full (continued)
This cartridge inventory field...
...is changed to the following for...
...the source address ...the destination address
Table 11-4 Effect on the cartridge inventory of a move operation when the source and destination are the
same
This cartridge inventory field...
......is changed to the following when...
...the location is empty ...the location is full
Occupied 0 1
Occupied Valid 1 1
Label blanks no change
Label Valid 0 no change
Label Scan Retries 0 no change
Send Volume Match 0 no change
Tape Drive Accessible no change 0
Pick Retries no change updated if retried
Put Retries no change updated if retried
Total Puts no change incremented
Source Address 255 element address