Operating instructions

SEPTEMBER 2005 MAGNUM 1X7 LTO AUTOLOADER
10-9
WHAT THE AUTOLOADER RETURNS
I/E → DT – Byte 06, Bit 3
The value returned for this field is 0, which indicates that the autoloader does
not support the MOVE MEDIUM (A5h) command when the source is the
import/export element and the destination is a tape drive.
I/E → I/E – Byte 06, Bit 2
The value returned for this field is 0, which indicates that the autoloader does
not support the MOVE MEDIUM (A5h) command when the source is the
import/export element and the destination is the import/export element.
I/E → ST – Byte 06, Bit 1
The value returned for this field is 0, which indicates that the autoloader does
not support the MOVE MEDIUM (A5h) command when the source is the
import/export element and the destination is a cartridge storage location.
I/E → MT – Byte 06, Bit 0
The value returned for this field is 0, which indicates that the autoloader does
not support the MOVE MEDIUM (A5h) command when the source is the
import/export element and the destination is the cartridge loader.
DT → DT – Byte 07, Bit 3
The value returned for this field is 0, which indicates that the autoloader does
not support the MOVE MEDIUM (A5h) command when the source is a tape
drive and the destination is a tape drive.
DT → I/E – Byte 07, Bit 2
The value returned for this field is 0, which indicates that the autoloader does
not support the MOVE MEDIUM (A5h) command when the source is a tape
drive and the destination is the import/export element.
DT → ST – Byte 07, Bit 1
The value returned for this field is 1, which indicates that the autoloader
supports the MOVE MEDIUM (A5h) command when the source is a tape
drive and the destination is a cartridge storage location.
DT → MT – Byte 07, Bit 0
The value returned for this field is 0, which indicates that the autoloader does
not support the MOVE MEDIUM (A5h) command when the source is a tape
drive and the destination is the cartridge loader.