Instructions

Safety, Environmental & Regulatory Information 6 (26)
• This device must accept any interference received, including interference that may cause
undesired operation.
3.3.4 Certifications
The product described in the present Installation Guide complies with part 15 of the FCC Rules.
Operating is subject to the following two conditions:
• UL Certificate Of Compliance (CoC) for Ordinaty Locations # E350576 for a TMRA of 60°C
• CB certificate # DK-42240-UL
These certificates can be downloaded as PDF files on the eWON Support website.
3.4 Field Implementation & Environmental Conditions
3.4.1 Ingress Protection
The eWON Cosy 131 has an IP20 protection grade.
Therefore, theeWON Cosy 131 is NOT suited for outdoor mounting. It has to be integrated in an
electrical cabinet, protected from excessive heat, humidity and dust.
Do not push any sharp object into the air vents or openings of the equipment.
3.4.2 Mounting Recommendations
The product is intended to be mounted vertically, label on the right side.
The normal mounting position of the eWON Cosy 131 is wall mounted on a horizontal Omega
type DIN-rail (EN 50022).
• Mounting the unit on DIN-rail
Pull the slide lock (located at the bottom of the back-side of the unit) downwards and
present the unit in front of the DIN rail. Tilt the eWON upwards in order to hang it on the
upper edge of the DIN rail by its hook. Gently tilt the unit downwards until it finds its original
position. Pull the slide lock upwards to fix and lock the unit on the DIN rail.
• Removing the unit from DIN-rail
Release the unit by pulling the slide lock downwards while gently tilting the unit upwards.
Free the unit by unhooking it from the upper rail edge.
eWON Cosy 131 Installation Guide IG-0022-00 1.9