Instructions

Hardware Description 14 (26)
4.4 Radio Communication Models
This device is intended to be used in fixed or mobile applications only (not for
portable applications).
The antenna used for this transmitter has to be installed in a space providing a
safe distance of at least 20 cm without encountering anyone and must not be
collocated or operating in conjunction with any other antenna or transmitter.
4.4.1 eWON Cosy 131 with Internal Wi-Fi Model
Item Value(s)
Protocols and
frequencies
IEEE802.11b/g/n, 2.4GHz - Channels: 1 to 11(inclusive)
Antenna connector Type RP-SMA
Antenna
(included in the
delivery)
Character Value(s)
Impedance 50 Ohms
Input power 802.11b/g/n 2.4Ghz 19dBm
Tightening torque 0.5 Nm
1
Device conformity has been tested with the reference antenna: Pulse W1030.
Additional information:
• The product complies with the RE directive, the FCC, the IC and Japan regulations related
to the Wi-Fi communications.
• Absolute maximum antenna gain as per FCC's rules and regulations, 47CFR:
– Part 15C : 2.14dBi
• Modifications cannot be made by the user if it influences the normal behavior of the device.
• This product contains part identified as follows by national authorities:
– FCC ID: QOQWF111
– IC ID: 5123A-BGTWF111
– RRA ID: KCC-CRM-BGT-WF111
– GITEKI (MIC) ID: 209-J00061
eWON Cosy 131 Installation Guide IG-0022-00 1.9
1. In the absence of a torque wrench, a soft manual tightening is sufficient.