Instructions

Hardware Description 13 (26)
4.3.3 Status LED
All Versions
Fig. 8 Status LEDs representation —
All versions
Label Description
BI1 Button BI1 input
Steady green = reset button is being pressed
PWR Power
Steady green = unit is powered on
USR User
Blinking green slowly = Unit is ok
Red pattern = special attention required
KEY Digital IN 1
See Digital Output & Digital Inputs, p. 23
Green = ON : Signal on Input 1 detected
DI2 Digital IN 2
See Digital Output & Digital Inputs, p. 23
Green = ON : Signal on Input 2 detected
T2M Talk2M
See Digital Output & Digital Inputs, p. 23
Green = ON : Talk2M VPN connection established
@ Internet
Steady green = Internet is configured on the eWON
Cosy 131
Wi-Fi Version
Fig. 9 Status LEDs representation –
Wi-Fi model
# Mark Description
1 / SMA male connector for Wi-Fi antenna
2 ST Modem status
Steady green = Wi-Fi connected
3
▅
Reception signal level
Steady orange = Poor signal
4
▅ ▆
Reception signal level
Steady orange = Signal is OK
5
▅ ▆ ▇
Reception signal level
Steady orange = Signal is good
Cellular Version (EC6133D & EC6133E)
Fig. 10 Status LEDs representation —
Cellular model
# Mark Description
1 / SMA female connector for GSM antenna
2 ST Modem status
Steady green = Modem connected
3
▅
Reception signal level
Steady orange = Poor signal
4
▅ ▆
Reception signal level
Steady orange = Signal is OK
5
▅ ▆ ▇
Reception signal level
Steady orange = Signal is good
eWON Cosy 131 Installation Guide IG-0022-00 1.9