EW7011
| ENGLISH EW7011 USB 3.0 Docking Station for 2.5" and 3.5" SATA hard disks Table of contents 1.0 Introduction ........................................................................................................... 2 1.1 Functions and features ...................................................................................... 2 1.2 Packing contents ............................................................................................... 2 2.0 Connecting a hard disk ...........................
| ENGLISH • • • • • EW7011 USB 3.0 Docking Station for 2.5” and 3.5” SATA hard disks Power supply USB 3.0 cable CD-ROM with OTB software Manual 2.0 Connecting a hard disk Use the following steps to mount a hard disk in the EW7011. 1. 2. 3. Make sure the EW7011 is completely turned off. Take your SATA hard disk with the label on top and the SATA connector at the bottom. Make sure the SATA connection is pointed towards the hard disk slot of the EW7011.
| ENGLISH Note: Make sure you must safely remove the EW7011 from your computer. Click ‘Safely remove hardware’ icon on the taskbar and you will see al list of devices. Click the device you want to remove. 4.1 Preparing the hard disk using Windows XP/Vista 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Right click the ‘My Computer’ icon. Click ‘Manage’. Select the option ‘Disk Management’ from the left side of the screen. Right click the new hard disk and choose ‘Initialize’. Click ‘OK’.
| ENGLISH 7. Choose the amount of free space needed for the new disk/partition. We recommend to use all of the free disk space. 8. Select the drive letter you wish to assign. 9. Enter a name for the new partition. 10. Format the hard disk. 11. After formatting, the hard disk is ready to be used. Note: Formatting the hard disk can take a few minutes, depending on the hard disk size. Do not interrupt this process. 5.0 OTB software The EW7011 is supplied with so called OTB software for Windows.
| ENGLISH 5.2.2 Making a backup with the PC Clone EX software 1. 2. 3. 4. 5. 6. 7. 8. 9. Click ‘Start’. Click ‘Programs’ Select ‘PC Clone EX’. Click ‘PC Clone EX’. Click the second icon in the menu tray (Files Backup). Select at the left column the hard disk and folders you want to backup. Click at the right side of the screen on the first icon called ‘Backup’. Click ‘Start’. The backup will now start. Click ‘OK’ to confirm that the backup has finished. 5.2.
| ENGLISH 7.0 Service and support This users manual has been carefully written by Ewent’s technical experts. If you have problems installing or using the product, please fill out the support form at the website www.ewent-online.com. You can also contact us by phone. Below you will find a list with phone numbers for each supported country.
| ENGLISH 9.0 Warranty conditions The five-year Ewent warranty applies to all Ewent products unless mentioned otherwise before or during the moment of purchase. When having bought a secondhand Ewent product the remaining period of warranty is measured from the moment of purchase by the product’s first owner. The Ewent warranty applies to all Ewent products and parts inextricably connected to and/or mounted on the main product.
| ENGLISH 10.0 Declaration of Conformity To ensure your safety and compliance of the product with the directives and laws created by the European Commission you can obtain a copy of the Declaration of Conformity concerning your product by sending an e-mail message to: info@ewentonline.com. You can also send a letter to: Ewent Europe, PO Box 276, 6160 AG Geleen, The Netherlands.
