Users Manual

after wearing
skin
Internal hardware
exception
Return to original factory for
maintenance
There was no
response to the
infant label in the
paired relationship
test
The distance between
the two labels is too
far
Keep labels within 10 cm apart
Abnormal operation
of
baby label
Replace the baby label with a new
one
Abnormal mother
label work
Replace the mother label with a new one
The red indicator
is flashing
continuously
Low power
Return to the factory and replace the battery
The red and blue
indicator lights are
always on at the
same time
Internal
hardware
exception
Return to original factory for maintenance
…… ……
5. Maintenance and precautions
 Keep the label surface dry, especially after the baby bath, remember to
wipe the water clean;
 Do not repair, disassemble or transform by yourself;
 When not in use, do not place the label within the positioning range of
the locator;
 When not in use, do not put the label near corrosive articles;
 Please use under normal temperature and humidity.