Product Overview

Model ZXM-2
Expansion Module
385 Hwy. 33
Englishtown, NJ 07726
Ph: 800-446-3110
Fx: 732-446-5362
SUBMITTAL SHEET
P/N 090377A0144 REV. A
CONTROLS INC.
E
W
Excellence Without Compromis
e
Forced Air Zone Controls
Copyright © EWC Controls 2006-2008 All Rights Reserved
SUBMITTAL FORM
SUBMITTED BY:
JOB:
ARCHITECT:
ENGINEER:
CONTRACTOR:
LOCATION:
SPECIFICATIONS
INPUT VOLTAGE:
PANEL:
cable from UZC4.
DAMPERS: 19-30VAC 60 Hz, Transformer
40-60 VA Max. NEC Class 2.
CURRENT DRAW: Max 8 VA @ 24VAC.
OVER-CURRENT PROTECTION:
PANEL: 4.0 amp or 96 VA. Protected via
UZC4.
DAMPERS: 2.5 amp or 60 VA.
WIRING: 18 gauge Solid copper wire. Do not
use Stranded or Shielded Cable.
TEMPERATURE: -20° to 160°F (-29° to
71°C).
HUMIDITY: 0% - 95% RH Non-Condensing.
19-30VAC 60 Hz, Supplied via bus
10.00”
1.70”
9.875”
CONTROLS INC.
E
W
FEATURES
NUMBER OF ZONES:
Provides 2 additional zones for the Model UZC4. A total of 8 Model ZXM-2 expansion Modules can be
utilized to add up to 16 additional zones.
COMPATIBLE THERMOSTATS:
Any Single Stage or Multi-Stage Heat/Cool or Heat Pump Thermostats.
COMPATIBLE DAMPERS:
EWC Models URD, ND, RSD and SID. Any 24vac 3 Wire or 2 Wire damper.
ADDITIONAL FEATURES:
On Board LED’s indicate system operation.
REQUIREMENTS:
Must be used to expand a current UZC4 or higher system. Cannot be used as a Stand-alone solution or
with older UZC systems (UZC-3C or UZC-2B).
DIMENSIONS:
®