Product Overview

Model XM-2
Expansion Module
385 Hwy. 33
Englishtown, NJ 07726
Ph: 800-446-3110
Fx: 732-446-5362
SUBMITTAL SHEET
P/N 090377A0143 REV. A
CONTROLS INC.
E
W
Excellence Without Compromis
e
Forced Air Zone Controls
Copyright © EWC Controls 2006-2008 All Rights Reserved
SUBMITTAL FORM
SUBMITTED BY:
JOB:
ARCHITECT:
ENGINEER:
CONTRACTOR:
LOCATION:
SPECIFICATIONS
INPUT VOLTAGE: 19-30VAC 60 Hz
Supplied via bus cable from BMPlus3000.
CURRENT DRAW: Max 7 VA @ 24VAC.
OVER-CURRENT PROTECTION: 4.0 amp
or 96 VA. Protected via BMPlus3000.
WIRING: 18 gauge Solid copper wire. Do not
use Stranded or Shielded Cable.
TEMPERATURE: -20° to 160°F (-29° to
71°C).
HUMIDITY: 0% - 95% RH Non-Condensing.
10.00”
1.70”
9.875”
CONTROLS INC.
E
W
FEATURES
NUMBER OF ZONES:
Provides 2 additional zones for the Model BMPlus3000. A total of 2 Model XM-2 expansion Modules can
be utilized to add up to 4 additional zones.
COMPATIBLE THERMOSTATS:
Any single stage Heat/Cool Thermostat or 2 Stage Heat, 1 Stage cool Heat Pump Thermostat.
COMPATIBLE DAMPERS:
EWC Models URD, ND, RSD and SID. Any 24vac 3 Wire or 2 Wire damper.
ADDITIONAL FEATURES:
*On Board LED’s indicate system operation.
REQUIREMENTS:
Must be used to expand a current BMPlus3000 or BMPlus5000 system. Cannot be used as a Stand-alone
solution or with older BM2000 or BMPlus2000 systems.
DIMENSIONS:
®