Brochure

NCM-300
The NCM-300 control panel is compatible with single stage systems, two stage heat systems and heat
pump systems. The panel is configured for 2 or 3 zones and non-expandable. This is ideal for residen-
tial new construction allowing a very competitive product to be sold to the homebuilder. The NCM-300
features automatic changeover and fan control from any zone with a built in computer “watchdog cir-
cuit” to insure proper operation. The panel is shipped with an SAS sensor for high and low limit pro-
tection control. The SAS has adjustable potentiometers for the heating and cooling limits for different
geographical locations. The NCM-300 control panel is compatible with any 3 or 4 wire thermostat on
any zone and allows for single stage thermostats to control heat pumps or multi-stage systems with an
adjustable timer. The NCM-300 is also compatible with two-stage heat pump and dual fuel thermostats.
The opposing system timer insures that no zone will starve for needed conditioned air, this can also
be turned off to allow for maximum run times. The “One Zone” allows the occupants to flip a switch
(VAC) and put the panel into vacation mode. This mode sets the zoning system based on the program
of the zone one thermostat allowing the whole system to be programmed from one location. The LED
bank allows for instant recognition and detection of system status for the installer.
The NCM-300 allows for dual transformer systems (ex. hydro-air, oil burners, hot water coils etc.) to wire
up without the need for additional relays. We have incorporated an isolation relay on the NCM-300 to
allow for easy wiring to these systems.
Model List Price
NCM-300 $305.00
VAC $57.00
RES $57.00
SAS Included
Zone Control Systems
BMPlus Series
(up to 3 heat & 2 cool)
XM-2 (Expansion Panel)
(maximum 7 zones)
The BMPlus control panel is a single stage, two stage, dual fuel, and heat pump compatible panel con-
trolling up to seven zones. The system features automatic changeover and fan control from any zone
with a built in computer “watchdog circuit” to insure proper operation. The BMPlus is supplied with an
SAS sensor for high and low temperature limit control that has field adjustable temperature limits.
The control panel is compatible with any 3 or 4 wire thermostat on any zone and allows for single stage
thermostats to control heat-pump or multi-stage equipment. The BMPlus is also compatible with any
two stage heat pump thermostat which can be used in all zones. Our unique 50% rule (if set) will inhibit
second stage if less than half of the total number of zones are calling. The intelligent design of the
BMPlus eliminates the need for a dual fuel kit for heat pumps. The panel can control staging based on
time or outdoor temperature with the optional OAS sensor.
The convenient “One Zone Mode” allows for the entire zoning system to be programmed from one
location. This can be controlled by the thermostat or the optional VAC switch. This is great for vacation
periods or night set back applications.
The XM-2 is the expansion panel for the BMPlus
series control panel. The XM-2 will allow the
original (3) three zone panel to expand (2) two
zones at a time. The XM-2 comes with a “plug-
n-play” cable that will connect to the main panel.
Model List Price
XM-2 $299.00
Model List Price Model List Price
BMPlus-3000 $360.00 XM-2 $299.00
BMPlus-5000 494.00 SAS $53.00
BMPlus-7000 690.00 OAS $53.00
VAC $57.00
VACOAS
Model List Price
OAS $53.00
VAC $57.00
Accessories
10
SAS Included