User`s manual

Ewave Stamper User’s Manual V1.0
Copyright © 2001 by Ewave, Inc.11
7Using The Configurator
The Configurator is a software utility available from Ewave’s web site
(http://www.electrowave.com/downloads/) which automates several configuration operations with Ewave
Radio Modems. The Configurator can also act as a simple terminal-emulator with ASCII or hexadecimal
display modes, which is useful for experimenting with and debugging serial devices.
7.1 Querying or Changing your STAMPER’s Current Settings
The Configurator can be used to do the following:
• Querying your STAMPER’s Current Settings (such as the current channel or firmware version)
• Changing your STAMPER’s Currently Assigned Channel
• Restoring your STAMPER’s Factory Default Configuration
To query or change your STAMPER’s current settings, first connect the STAMPER to your PC’s comm.
port via a standard straight-thru cable, start the Configurator and follow the numbered steps in the screen-
shot below: