Operating instructions

Before Your First Use

Carefully unpack the food steamer and remove all packaging materials. Select a

flat, heat-resistant, non-flammable surface to place the food steamer. Do not

immerse the product in water or other liquid. To remove any dust that may have

accumulated on the removable parts during packaging, clean the surface with

damp cloth and remove any stickers (except for any warning/caution stickers)

Operating Instructions

z Pour the required quantity of cold tap water into the reservoir (consult the

cooking guide). Do not exceed the maximum level (refer to the markings on

the inside of the reservoir). Do not put anything in the reservoir. Do not use

wine, meat of vegetable stock or any other liquid.

z Place the food in the steam bowl. Do not add herbs or spices before the end

of cooking.

z Place the lid on the steam bowl. Ensure that the handles of the lid are

perfectly in line with the handles of the steam bowl. Do not overfill the

steam bowl, thereby blocking the holes in the lid (the steam must be able to

circulate and escape freely.)

z Put the steam bowl on the base.

z Plug the steam cooker in, The indicator lamp lights up.

z In most cases, the water poured into the reservoir will be sufficient to cook

the food. If necessary due to personal taste or if some foods require a

longer cooking time, water may be added to the reservoir and the

vaporization process continued by following the instructions.

z Once cooking is complete, unplug the cooker. Remove the steam bowl

carefully. Gently lift off the lid to avoid burning yourself (steam can cause

burns).

To serve, turn the lid over and slide under the steam bowl.

1. After thoroughly cleaning the unit, begin by filling up the heating base

with room temperature water according to desired level showing on

electric panel, wipe the unit dry then plug the cord in with dry hands on a

flat and dry surface area.

2. Then add the Food Basket, followed by the Separator Ring . (See

diagram on pg. 6)

3. Sequentially follow the diagram on page 6 of this manual.