Quick Setup Guide

Germany keyboard Italy keyboard
Spain keyboard Turkey Q keyboard
UK keyboard Canadian FR keyboard
Working Mode (Apply for 2.4GHz and Bluetooth Connection)
If you are heading for a working area which lies outside the Bluetooth signal range, you may
activate scanner’s store mode, following steps described below. Under this mode, all
scanned data will be stored directly into the buffer memory of the device. Furthermore, the
data entries will be permanently saved in the buffer memory prior to the manual upload into
the working station, so that you may upload them when you are near your working device.
*Normal Mode Store Mode
Output Stored Data Output Total Entry
Clear Memory
Beep Settings
Beep Off: Disable scanner from beeping to indicate successful scans.