Configuration Manual

Available Configurations
The tables below show the available 3D configurations with standard cameras on an
XTnano server. They show the link assignment at the level of the codec module of a V3X
board.
Note
The configurations preceded by an asterisk are only available with the rear
panels available in 2013.
IN4/OUT1 IN3/OUT2 IN2/OUT3 IN1/OUT4
#REC #PLAY
Prim.
Link
Sec.
Link
Prim.
Link
Sec.
Link
Prim.
Link
Sec.
Link
Prim.
Link
Sec.
Link
1 0 REC1A REC1B
2 0 REC2A REC2B REC1A REC1B
3 0 REC3A REC3B REC2A REC2B REC1A REC1B
*4
0 REC4A REC4B REC3A REC3B REC2A REC2B REC1A REC1B
0 1 PLAY1A PLAY1B
1 1 PLAY1A PLAY1B REC1A REC1B
2 1 PLAY1A PLAY1B REC2A REC2B REC1A REC1B
3 1 PLAY1A PLAY1B REC3A REC3B REC2A REC2B REC1A REC1B
0 2 PLAY1A PLAY1B PLAY2A PLAY2B
1 2 PLAY1A PLAY1B PLAY2A PLAY2B REC1A REC1B
2 2 PLAY1A PLAY1B PLAY2A PLAY2B REC2A REC2B REC1A REC1B
*0
3 PLAY1A PLAY1B PLAY2A PLAY2B PLAY3A PLAY3B
*1
3 PLAY1A PLAY1B PLAY2A PLAY2B PLAY3A PLAY3B REC1A REC1B
*0
4 PLAY1A PLAY1B PLAY2A PLAY2B PLAY3A PLAY3B PLAY4A PLAY4B
CONFIGURATION MANUAL XTnano Server 11.02
3. Multicam Configuration 69