Owner's manual

5.6.5. Adding Cuts in Playlist Elements
Description
The Add Cut command is only available from the Remote Panel. This command
duplicates a playlist or timeline element (clip, record train...) and adjusts the SHORT IN
and SHORT OUT points of these new duplicated elements:
• On both these elements, the guardbands and other effects are kept unchanged as in
the original one.
• In the first duplicated element, the SHORT IN point is left unchanged while the
SHORT OUT point is adjusted to the cut point.
• In the second duplicated element, the SHORT OUT point is left unchanged while the
SHORT INpoint is adjusted to the cut point as illustrated hereunder.
Multicam Behavior
When adding a cut to a clip, Multicam will behave as follows:
• The transition applied at the cut point is a cut (for both audio and video).
• The speed of the cut elements is the same as the original element, even if it is
“Unknown”.
• The stop and start modes of the cut elements are auto.
• Any loop defined on the playlist that includes the original element conserves and
includes the cut elements.
• Any tag defined and active on the original element at the cut point is recreated at the
short-in of the second cut element.
82 5. Playlist Management
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013