Manual

Issue

11.01.C

nano series Servers - Version 11.01 – Operating Manual

EVS Broadcast Equipment SA – November 2012

6. To specify whether to perform a Short or Long copy, select the desired value

(SHORT or LONG) pressing the C key.

• SHORT mode (default): only the section of the elements between the Short IN

and Short OUT as defined in the playlist will be copied, increased by the duration

of the guardbands, as defined on the destination

system.

• LONG mode: the entire original clips, including their guardbands, will be copied

on the destination system.

7. Once the various options have been decided, press ENTER to confirm the copy, or

MENU to cancel.

The F_ key of the destination playlist will flash until all clips have been copied. This

playlist can be recalled during that process for browsing, editing or playback. If some clips

have not yet been copied, the original network clip is used instead.

9.10.4 How to Copy a Playlist from the VGA Clip

Screen

Copying a playlist using the CUT/COPY/PASTE functions from the Clip screen will only

copy the “EDL” (the playlist definition) and the clips themselves will remain in their original

location.

To copy a local playlist from the VGA Clip Screen, proceed as follows:

1. From the VGA Clip Screen, open the playlist bank by pressing END on the keyboard.

2. Select the playlist to copy and press CTRL+C.

3. Go to the empty playlist location on the same server where you want to copy the

playlist and press CTRL+V.

The EDL of the playlist is copied to the requested location.

Copy Playlist 11/03 and all net. clips

to Playlist 13 ?

[Menu]: Cancel

[Enter]: Confirm

COPY

PLST+CLP

SHORT

NEW PLST