Manual

Issue

11.01.C

nano series Servers - Version 11.01 – Operating Manual

EVS Broadcast Equipment SA – November 2012

• Remaining capacity on the server (all record trains together)

8.3.3 The Function Bar

The second line displays the available functions. Each function can be called by the

corresponding F_ key of the keyboard, or by clicking with stylus & tablet on the

corresponding area on this line.

F1: Name

This function is used to name a clip. For more information on how to name a clip in the

VGA, refer to the section 8.3.8 ‘How to Name a Clip’, on page 48.

F2: Clip/Cam

This function toggles between CLIP mode and CAM mode.

• In CLIP mode, actions on a clip will use all available cameras for this clip.

• In CAM mode, actions on a clip will only use the selected camera for this clip.

Other functions such as Name, Delete, Copy, Set TC, >Archive depend on this mode

selection.

F3: Call

The operator can gain immediate access to a local or network clip by typing its ID

number.

F4: Pref

This option changes the primary camera of a clip. For information on how to change the

primary camera of a clip, refer to the section 8.3.9 ‘How to Change the Primary Camera

of a Clip’, on page 48.

F5: View

This option changes the standard display to the extended display and vice versa. Refer to

the section 8.3.13 ‘Clip Screen - Extended View’, on page 52.

F10: Playlist

The Playlist screen can be accessed by selecting F10 on the keyboard.