User Manual

Issue

10.03.D

XTnano

–

Version 10.03

–

Operating Manual

EVS Broadcast Equipment SA – July 2010

SPEED

The Speed function allows defining the speed at which one or all clips of playlist

will be played. Select the playback speed of the clip with the lever, then press

ENTER to validate. Values are ‘Unknown’ and from 0 to 100%.

Operators have access to the secondary lever control like when clips are replayed.

While editing the speed of a clip, pressing SHIFT + the Lever key on the Remote

allows to access the secondary lever speed defined in the menu.

FX DUR

The FX Dur function sets the duration of the transition effect. The default value

that initially appears is determined by the value set in the Setup menu. The effect

duration will affect the transition at the beginning of the selected clip. Use the

lever to adjust the value, then press ENTER to confirm.

EFFECT

The Effect function (SHIFT+C key) is used to select the type of transition effect

(Mix/Wipe/Cut/Fade). Move the lever to set the type of effect, when Effect is

highlighted. Press ENTER to validate.

For more information on the effects types, refer to the section 9.14 ‘Transition

ffects’, on page 82.

DELETE

The Delete function allows the operator to quickly edit a playlist by removing the

selected clip. The clip that has been «cut» can then be inserted into another

location. This clip is displayed on the second PRV output. To insert it at another

position in the playlist, simply go to that position using the jog dial and press the

Insert key (or TAKE).

9.9.2 SECONDARY MENU IN PLAYLIST EDIT MODE

INTRODUCTION

You can access the secondary menu of the Playlist Edit mode pressing MENU on

the Remote Panel when you are in the main menu of the Playlist Edit mode.

OtherAng

Replace Redo Undo

REPLACE

The Replace function makes it possible to replace a portion of a playlist by the

same A/V material to which effects have been added (externally or internally).

This consolidates the effects within the playlist.