User Manual

Issue

10.03.D

XTnano

–

Version 10.03

–

Operating Manual

EVS Broadcast Equipment SA – July 2010

8.2.8 HOW TO SHORTEN A CLIP

To shorten a clip, proceed as follows:

1. Recall the desired clip by pressing the corresponding F_ key.

2. Move the jog dial to browse the clip and reach to the desired Short IN point.

3. Press the IN key to mark a new Short IN point. The new Short IN point is

instantly saved.

4. Move the jog dial to reach the desired Short OUT point.

5. Press the OUT key to mark a new Short OUT point. The new Short OUT

point is instantly saved.

Move the lever or press the PLAY key to play the clip. The replay will stop at the

new Short OUT point (or after the Short OUT point if the Post-Roll mode is

enabled).

Goto IN and Goto OUT

You can use Goto IN and Goto OUT functions to jump immediately onto Short IN

or Short OUT points respectively.

8.2.9 SECONDARY MENU IN CLIP MODE

OVERVIEW

In Clip mode, the secondary menu of the Remote Panel is different from the

Record Train mode:

Press MENU to access the secondary menu, the LCD display will be:

PGM1 112A *PRV1* 112B

Push Aux Clip PostRoll

>Archive Cam

P.1 B.1

PL 11: < >

Msg:

Rst Cam Sync Prv

Cam A Cam B Cam C

1keyword890123 2 keyword89012 3 keyword89012

111A

Push Aux Clip PostRoll

>Archive Cam