User manual

IPAddress
Availability This setting is only available if the Port setting is set to Lan
PC.
Description Specifies the IP address of the PC LA N.
Values xxx.xxx.xxx.xxx
Default value 192.168.10.60
Dial Speed
Description Defines the multiplication factor applied to the jog value.
Values Range of values: 10x to 1000x (multiple of 10x)
Default value 10x
3.9.15. Special Effects Settings
Introduction
The Special effects settings allow specifying special effects to be applied to such as
effect duration, color or tool used for the wipe and split effects, for the offside line feature,
etc
These fields are available in the following interfaces:
• in the Multicam Configuration window, Operation tab, in the basic display mode:
◦ on page 6 on the server-based application.
◦ on page 1 on the web-based interface.
• in the Operational setup menu of the Remote Control Panel (pages 12.X).
XT2+ Server- Version 11.01- Configuration Manual
3. Multicam Configuration 216