User manual

Second lever range
Context The lever can be used in normal mode to play back clips at
slow motion speed from 0 to 100%. A secondary range is
available to playback material at other speed ranges.
To gain access to the secondary speed from the remote
controller, press SHIFT + LEVER/TAKE.
The second lever range is also available when editing the
speed of playlist clips.
Description Specifies the secondary speed range on the Remote Panel.
Values The following values are possible:
• -100% → +100%
• 0 → +200%
• -200% → +200%
• 0 → +400%
• -400% → +400%
Default value -100% → +100%
Recall clip toggle
Description Enables/disables the selection of the camera of a clip through
the Function keys: Pressing several times the F_ key browses
to CAM A, CAM B, CAM C, CAM D, CAM E and CAM F.
Values Yes / No
Default value Yes
Record key
Description Changes the function of the RECORD key on the Remote
Panel, as described below.
Values The following values are possible:
• Start REC+Live:
Pressing the RECORD key starts the record process and
switches to LIVE mode.
• Live:
Pressing the RECORD key only switches to last recorded
picture, but the record is not restarted if it has been
previously stopped by the operator.
Default value Start REC+Live
207 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B